◆ Product introduction ◆
?Membrane Separation Nitrogen generation technology is the use of different relative permeability of different gases in the membrane, and achieve the purpose of Nitrogen and oxygen separation. ?Compared with other generation Nitrogen method, Membrane separation Nitrogen equipment is smaller, lighter, more efficient, wide usage,more convenient operation & maintenance, above are the reason to usage inwide field.
?Air compression system, Air handing system, Membrane separation Nitrogen system, Nitrogen supercharging system, central control system, box machine auxiliary system etc.
?Adopt the world's advanced PRISM membrane separation of Nitrogen technology.
?Equip with chassis of the north Mercedes-Benz and otherwell-known domestic manufacturers.
?A full set of equipment are installed, fixed on the off-road chassis.
?Meet the "GB1589-2004 road vehicle outside the contour size, shaft load and quality limits.
?Comply with GB1589-2004 limits on overall dimensions, axle loads and mass of road vehicles.
?The whole set of equipment has sufficient earthquake resistance and off-road performance.
?Have the model announcement of the Ministry of industry and information technology to meet customer needs.
?The control system has a high degree of integration, convenient operation and patrol inspection, and high safety performance, which meets the HSE requirements of the well pad.
◆ Technical parameter ◆
Model | MZD-600/250Q MZD-600/350Q | MZD-900/350Q MZD-900/500Q | MZD-1200/350Q MZD-1200/500Q |
Nitrogen Flow | 600N3/h （Single or dual trucks） | 900Nm3/h （Single or dual trucks） | 1200Nm3/h (Dual-trucks) |
Nitrogen Purity | 95%~98% |
Discharge Pressure | 25MPa / 35MPa | 35MPa / 50MPa |
Ambient Temp | -35°C~45°C |
Drive Mode | Diesel engine / Electric motor / Gas engine |
Vehinde Type | Special vehicle |
